Code 128 Length Control
This feature specifies whether variable-length or fixed-length decoding will be set for Code 128.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any unused barcodes on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
04B701(CR)
Code 128 Length Control = Fixed Length
Product Reference Guide
Enter/Exit Programming Mode
04B700(CR)
Code 128 Length Control = Variable Length
313