Dell N1100-ON Reference Manual page 98

Table 1-1. System Command Groups (continued)
Command Group
802.1x
Captive Portal
Denial of Service
Management ACL
Password Management
SSH
Audio Visual Bridging Commands
MMRP
MSRP
MVRP
802.1AS Timesync
Data Center Commands
Data Center Bridging
OpenFlow
Priority Flow Control
Layer 3 Routing Commands
ARP (IPv4)
BFD
BGP
BGP Routing Policy
DHCP Server and Relay
Agent (IPv4)
Description
Configures and displays commands related to 802.1x
security protocol.
Blocks clients from accessing network until user
verification is established.
Provides several Denial of Service options.
Configures and displays management access-list
information.
Provides password management.
Configures SSH authentication.
Configures and displays MMRP information.
Configures and displays MSRP information.
Configures and displays MVRP information.
Configures and displays commands related to 802.1AS
timesync.
Configures data center bridging snooping and displays
data center bridging information.
Configures the switch to be managed by a centralized
OpenFlow Controller using the OpenFlow protocol.
Configures priority flow control and displays priority flow
control information.
Manages Address Resolution Protocol functions.
Configures BFD and displays BFD information.
Configures BGP and displays BGP information.
Configures BGP routing policy and displays BGP routing
policy information.
Manages DHCP/BOOTP operations on the system.
Dell EMC Networking CLI
98