Table of Contents
Advertisement
Table 1-1. System Command Groups (continued)
Command Group
IPv6 MLD Snooping
Querier
IP Source Guard
iSCSI Optimization
Link Dependency
LLDP
Loop Protection
MLAG
Multicast VLAN
Registration
Port Channel
Port Monitor
QoS
Spanning Tree
UDLD
VLAN
Voice VLAN
Security Commands
AAA
Administrative Profiles
Commands
E-mail Alerting
RADIUS
TACACS+
Description
Configures IPv6 Snooping Querier and displays IPv6
Snooping Querier information.
Configures IP source guard and displays IP source guard
information.
Configures special QoS treatment for traffic between
iSCSI initiators and target systems.
Configures and displays link dependency information.
Configures and displays LLDP information.
Configures keep alive.
Configures MLAG and displays MLAG information.
Configures MVLAN and displays MVLAN information.
Configures and displays Port channel information.
Monitors activity on specific target ports.
Configures and displays QoS information.
Configures and reports on Spanning Tree protocol.
Configures UDLD and displays UDLD information.
Configures VLANs and displays VLAN information.
Configures voice VLANs and displays voice VLAN
information.
Configures connection security including authorization
and passwords.
Group commands into a profile and assign a profile to a
user upon authentication.
Configures e-mail capabilities.
Configures and displays RADIUS information.
Configures and displays TACACS+ information.
Dell EMC Networking CLI
97
Advertisement
Table of Contents
