Planet Networking & Communication SGS-6340-24T4S Command Manual page 983

Usage Guide:
The meaning of each field is listed in the following table.
Field Description
Interface Ethernet port number
Status Power supply status
Enable: Power supply enabled
Disable: Power supply disabled
Oper Working status
On: PD is normally connected and powered
Off: PD is not connected
faulty: PD detection failed
deny: not enough available power or the required power is over the limit
Power The power used by the port currently
Max The max power allowed to be distributed to the port
Current The present current of the port
Volt The present voltage of the port
Priority The Power supply priority
Critical: the highest-level priority
High: the high-level priority
Low: the low-level priority
Class Class
0
1
2
3
4
It is impossible for a compatible PD to provide a class 4 signal
Examples:
Display the current PoE status on port 1 to port 6.
Switch# show power inline interface ethernet 1/0/1-6
Interface Status
------------ ------- ------ --------- ------- ----------- ------- -------- -----
Ethernet1/0/1 enable
Ethernet1/0/2 enable
Ethernet1/0/3 enable
Ethernet1/0/4 enable
Ethernet1/0/5 enable
Ethernet1/0/6 enable
Usage PD Input Power (W)
Default 0.44~12.95
Optional 0.44~3.84
Optional 3.84~6.49
Optional 6.49~12.95
Reserved treated as class 0 and reserved for future use
Oper Power(mW) Max(mW) Current(mA) Volt(V) Priority Class
off 0
off 0
off 0
off 0
off 0
off 0
15400 0
15400 0
15400 0
15400 0
15400 0
15400 0
68-431
0 high 0
0 low 0
0 low 0
0 low 0
0 low 0
0 low 0