Copy（Tftp - Planet Networking & Communication SGS-6340-24T4S Command Manual

1.5.2 copy（TFTP）
Command:
copy <source-url> <destination-url> [ascii | binary]
Function:
Download files to the TFTP client.
Parameter:
<source-url> is the location of the source files or directories to be copied; <destination-url> is the destination
address to which the files or directories to be copied; forms of <source-url> and <destination-url> vary depending
on different locations of the files or directories. ascii indicates the ASCII standard will be adopted; binary indicates
that the binary system will be adopted in the file transmission（default transmission method）.When URL represents
a TFTP address, its form should be: tftp://{<ipaddress>|<ipv6address>|<hostname>}/<filename>, amongst
<ipaddress>| <ipv6address> is the IPv4 or IPv6 address of the TFTP server/client, <hostname> is the name of the
host mapping with the IPv6 address, it does not support the file download and upload with hosts mapping with IPv4
addresses, <filename> is the name of the TFTP upload/download file.
Special keyword of the filename
Keywords
running-config
startup-config
nos.img
boot.rom
Command Mode:
Admin Mode.
Usage Guide:
This command supports command line hints, namely if the user can enter commands in following forms: copy
<filename> tftp:// or copy tftp:// <filename> and press Enter, following hints will be provided by the system:
tftp server ip/ipv6 address[x.x.x.x]/[x:x::x:x]>
tftp filename>
Requesting for TFTP server address, file name
Source or destination addresses
Running configuration files
It means the reboot configuration files when using copy running-config
startup-config command
System files
System startup files
1-114