Planet Networking & Communication SGS-6340-24T4S Command Manual page 628

Function:
Set the delimiter of each parameter for suboption of option82 in global mode, no command restores the delimiter as
slash.
Parameters:
None.
Default Settings:
slash ("/").
Command Mode:
Global mode
Usage Guide:
Divide parameters with the configured delimiters after users have defined them which are used to create suboption
(remote-id, circuit-id) of option82 in global mode.
Example:
Set the parameter delimiters as dot (".") for suboption of option82.
Switch(config)# ip dhcp snooping information option delimiter dot
35.18 ip dhcp snooping information option remote-id
Command:
ip dhcp snooping information option remote-id {standard | <remote-id>}
no ip dhcp snooping information option remote-id
Function:
Set the suboption2 (remote ID option) content of option 82 added by DHCP request packets (they are received by
the port). The no command sets the additive suboption2 (remote ID option) format of option 82 as standard.
Parameters:
standard means the default VLAN MAC format. <remote-id> means the remote-id content of option 82 specified by
users, its length can not exceed 64 characters.
Command Mode:
Global Mode
35-76