Planet Networking & Communication SGS-6340-24T4S Command Manual page 364

Function:
Creates a class map and enters class map mode; the no command deletes the specified class map.
Parameters:
<class-map-name> is the class map name.
Default:
No class map is configured by default.
Command mode:
Global Mode
Example:
Creating and then deleting a class map named "c1".
Switch(config)#class-map c1
Switch(Config-ClassMap-c1)#exit
Switch(config)#no class-map c1
20.4 clear mls qos statistics
Command:
clear mls qos statistics [interface <interface-name> | vlan <vlan-id>]
Function:
Clear accounting data of the specified ports or VLAN Policy Map. If there are no parameters, clear accounting data of
all policy map.
Parameters:
<vlan-id>: VLAN ID
<interface-name>: The interface name
Default:
Do not set action.
Command mode:
Admin Mode
20-126