Planet Networking & Communication SGS-6340-24T4S Command Manual page 682

Function:
Configure the query interval.
Parameter:
vlan-id: VLAN ID, the valid range is <1-4094>
value: query interval, valid range: <1-65535>secs.
Command Mode:
Global Mode
Default:
125s
Usage Guide:
It is recommended to use default value and if layer 3 MLD is in operation, please make this configuration in
accordance with the MLD configuration as possible.
Example:
Switch(config)#ipv6 mld snooping vlan 2 query-interval 130
38.1.13 ipv6 mld snooping vlan query-mrsp
Command:
ipv6 mld snooping vlan <vlan-id> query-mrsp <value>
no ipv6 mld snooping vlan <vlan-id> query-mrsp
Function:
Configure the maximum query response period. The "no" form of this command restores the default value.
Parameter:
vlan-id: VLAN ID, the valid range is<1-4094>
value: the valid range is <1-25> secs .
Command Mode:
Global Mode
38-130