Planet Networking & Communication SGS-6340-24T4S Command Manual page 675

Command Mode:
Admin Configuration Mode
Usage Guide:
Use show command to check the deleted group record.
Example:
Delete the mrouter port in vlan 1.
Switch# clear ipv6 mld snooping vlan 1 mrouter-port
Relative Command: show ipv6 mld snooping mrouter-port
38.1.3 debug mld snooping all/packet/event/timer/mfc
Command:
debug mld snooping all/packet/event/timer/mfc
no debug mld snooping all/packet/event/timer/mfc
Function:
Enable the debugging of the switch MLD Snooping; the "no" form of this command disables the debugging.
Command Mode:
Admin Mode
Default:
The MLD Snooping Debugging of the switch is disabled by default
Usage Guide:
This command is used for enabling the switch MLD Snooping debugging, which displays the MLD data packet
message processed by the switch——packet, event messages——event, timer messages——timer,messages of
down streamed hardware entry——mfc,all debug messages——all.
38-123