Planet Networking & Communication SGS-6340-24T4S Command Manual page 888

Parameter:
<integer> is the ID of ULPP group, range from 1 to 48.
Command mode:
Global Mode.
Default:
Any ULPP groups are not configured.
Usage Guide:
None.
Example:
Configure ulpp group 20 or enter the mode of ulpp group 20.
Switch(config)# ulpp group 20
Switch(ulpp-group-20)#
55.28 ulpp group master
Command:
ulpp group <integer> master
no ulpp group <integer> master
Function:
Configure the master port of ULPP group, the no command deletes the master port.
Parameter:
<integer> is the ID of ULPP group, range from 1 to 48.
Default:
There is no master port configured by default.
Command mode:
Port mode.
55-336