Planet Networking & Communication SGS-6340-24T4S Command Manual page 494

Default:
Not configured.
Command Mode:
OSPF protocol mode
Example:
Switch#config terminal
Switch(config)#router ospf
Switch(config-router)#passive-interface vlan1
25.51 redistribute
Command:
redistribute {kernel |connected| static| rip| isis| bgp} [metric<value>] [metric-type
{1|2}][route-map<word>][tag<tag-value>]
no redistribute {kernel |connected| static| rip| isis| bgp} [metric<value>] [metric-type
{1|2}][route-map<word>][tag<tag-value>]
Function:
Introduce route learnt from other routing protocols into OSPF.
Parameter:
kernel introduce from kernel route.
connected introduce from direct route.
static introduce from static route.
rip introduce from the RIP route.
isis introduce from ISIS route.
bgp introduce from BGP route.
metric <value> is the introduced metric value, ranging between 0-16777214.
metric-type {1|2} is the metric value type of the introduced external route, which can be 1 or 2, and it is 2 by default.
route-map <word> point to the probe of the route map for introducing route.
tag<tag-value> external identification number of the external route, ranging between 0~4294967295, defaulted at 0.
Command Mode:
OSPF Protocol Mode.
25-99