Planet Networking & Communication SGS-6340-24T4S Command Manual page 892

Command mode:
Global Mode.
Usage Guide:
None.
Example:
Create ULSM group 10.
Switch(config)# ulsm group 10
56.4 ulsm group {uplink | downlink}
Command:
ulsm group <group-id> {uplink | downlink}
no ulsm group <group-id>
Function:
Configure the uplink/downlink ports of ULSM group. The no command deletes the uplink/downlink ports.
Parameter:
<group-id>: The ID of ULSM group, the range from 1 to 32.
uplink: Configure the port as the uplink port.
downlink: Configure the port as the downlink port.
Default:
The port does not belong to any ULSM group.
Command mode:
Port Mode.
Usage Guide:
Configure the uplink/downlink ports of ULSM group. Each ULSM group can configure 8 uplink ports and 16 downlink
ports at most.
Example:
Configure port1/3 as the uplink port of ULSM group10.
Switch(config)# interface ethernet 1/3
Switch(config-If-Ethernet1/3)# ulsm group 10 uplink
56-340