Planet Networking & Communication SGS-6340-24T4S Command Manual page 963

Displayed Information
LocalAddress
LocalPort
RemoteAddress
RemotePort
State
65.28 show version
Command:
show version
Function:
Display the switch version.
Command mode:
Admin Mode
Usage Guide:
Use this command to view the version information for the switch, including hardware version and software version.
Example:
Switch#show version
65.29 traceroute
Command:
traceroute [source <ipv4-addr> ] { <ip-addr> | host <hostname> } [hops <hops> ] [timeout <timeout> ]
Function:
This command is tests the gateway passed in the route of a packet from the source device to the target device. This
can be used to test connectivity and locate a failed sector.
Explanation
Local IPv6 address of UDP connection
Local port of UDP connection
Remote IPv6 address of UDP connection
Remote Port of UDP connection
The current state of UDP connection
65-411