Planet Networking & Communication SGS-6340-24T4S Command Manual page 875

55.10 flush disable mac-vlan
Command:
flush disable mac-vlan
Function:
Disable sending the flush packets of deleting the dynamic unicast mac according to vlan.
Parameter:
None.
Default:
Disable.
Command mode:
ULPP group configuration mode.
Usage Guide:
If configure this command, when the link is switched, it will not actively send the flush packets to notify the upstream
device to delete the dynamic unicast mac according to vlan.
Example:
Disable sending the flush packets deleted by mac-vlan.
Switch(config)#ulpp group 1
Switch(ulpp-group-1)#flush disable mac-vlan
55.11 flush enable arp
Command:
flush enable arp
Function:
Enable sending the flush packets of deleting ARP.
Parameter:
None.
55-323