Planet Networking & Communication SGS-6340-24T4S Command Manual page 491

ibm, Realize through ibm ABR;
shortcut, Specify a shortcut-ABR;
standard, Realize with standard（RFC2328）ABR.
Default:
Cisco by default.
Command Mode:
OSPF protocol mode
Usage Guide:
For Specifying the realizing type of abr. This command is good for interactive operation among different OSPF
realizing method and is especially useful in the multiple host environment.
Example:
Configure abr as standard.
Switch#config terminal
Switch(config)#router ospf 100
Switch(config-router)#ospf abr-type standard
25.47 ospf router-id
Command:
ospf router-id <address>
no ospf router-id
Function:
Specify a router ID for the OSPF process. The "no ospf router-id" command cancels the ID number.
Parameter:
<address>, IPv4 address format of router-id.
Default:
No default configuration.
Command Mode:
OSPF protocol mode
25-96