Planet Networking & Communication SGS-6340-24T4S Command Manual page 745

Parameters:
None
Command Mode:
Admin Mode
Default Settings:
None
Usage Guide:
Display the debug information of the number of dynamic ARP on the port.
Examples:
Switch#debug switchport arp count
%Jun 14 16:04:40 2007 Current arp count 21 is more than or equal to the maximum limit in port Ethernet3/1
!!%Jun 14 16:04:40 2007 Arp learning will be stopped and some mac will be delete !!
42.4 debug switchport mac count
Command:
debug switchport mac count
no debug switchport mac count
Function:
When the number limitation function debug of MAC on the port, if the number of dynamic MAC and the number of
MAC on the port is larger than the max number allowed, users will see debug information. "no debug switchport
mac count" command is used to disable the number limitation function debug of MAC on the port.
Parameters:
None
Command Mode:
Admin Mode
Default Settings:
None
42-193