Spanning-Tree Mst Cost - Planet Networking & Communication SGS-6340-24T4S Command Manual

Command mode:
Global Mode
Default:
The default values of the attributes of the MSTP region are listed as below:
Attribute of MSTP
Instance
Name
Revision
Usage Guide:
Whether the switch is in the MSTP region mode or not, users can enter the MSTP mode, configure the attributes,
and save the configuration. When the switch is running in the MSTP mode, the system will generate the MST
configuration identifier according to the MSTP configuration. Only if the switches with the same MST configuration
identifier are considered as in the same MSTP region.
Example:
Enter MSTP region mode.
Switch(config)#spanning-tree mst configuration
Switch(Config-Mstp-Region)#

19.1.20 spanning-tree mst cost

Command:
spanning-tree mst <instance-id> cost <cost>
no spanning-tree mst <instance-id> cost
Function:
Sets path cost of the current port in the specified instance; the command "no spanning-tree mst <instance-id>
cost" restores the default setting.
Parameter:
<instance-id> sets the instance ID. The valid range is 0-64. <cost> sets path cost, different cost formats have
different ranges. For the default dot1t mode the valid range is 1-200,000,000, and for dot1d is 1-65535.
Command mode:
Port Mode
Default Value
There is only the instance 0. All the VLANs (1~4094) are mapped to
the instance 0.
MAC address of the bridge
0
19-107