Planet Networking & Communication SGS-6340-24T4S Command Manual page 978

Parameters:
max-wattage: value of the max output power, in W. Any integer from 37 to 370 is valid.
Command:
Global Mode.
Default:
The global max output power is 370W. The no power inline max will resume the default configuration.
Usage Guide:
Setting a global max output power can guarantee a secure power supply and an effective method to control the
power consumed by connected subordinate devices.
Example:
Set the global max output power to 50W.
Switch(Config)#power inline max 50
68.1.8 power inline max (Port)
Command:
power inline max <max-wattage>
no power inline max
Function:
Set the max output power of a specified port.
Parameters:
max-wattage: the value of the max output power, in mW, ranging from 1 to 15400mW (802.3af)/1 to 3000mW
(802.3at), with a granularity of 100mW. Any value less than 100mW will be taken as 100mW, that is, 1~100 equals
100, 15301~15400 equals 15400. But the value set by users will be maintained without being rounded up.
Command Mode:
Port Mode.
Default:
The max output power of a port is 15400mW (802.3af)/3000mW (802.3at).
68-426