Planet Networking & Communication SGS-6340-24T4S Command Manual page 543

Parameters:
<network-number> is the network number; <mask> is the subnet mask in the decimal format; <prefix-length>
stands for mask in prefix form. For example, mask 255.255.255.0 in prefix is "24", and mask 255.255.255.252 in
prefix is "30". Note: When using DHCP server, the pool mask should be longer or equal to that of layer 3 interface IP
address in the corresponding segment.
Default:
If no mask is specified, default mask will be assigned according to the address class.
Command Mode:
DHCP Address Pool Mode
Usage Guide:
This command sets the scope of addresses that can be used for dynamic assignment by the DHCP server; one
address pool can only have one corresponding segment. This command is exclusive with the manual address
binding command "hardware address" and "host".
Example:
Configuring the assignable address in pool 1 to be 10.1.128.0/24.
Switch(dhcp-1-config)#network-address 10.1.128.0 24
30.1.26 next-server
Command:
next-server <address1>[<address2>[...<address8>]]
no next-server
Function:
Sets the server address for storing the client import file; the "no next-server" command cancels the setting.
Parameters:
<address1>...<address8> are IP addresses, in the decimal format.
Command Mode:
DHCP Address Pool Mode
30-35