Planet Networking & Communication SGS-6340-24T4S Command Manual page 721

41.2 debug dot1x error
Command:
debug dot1x error
no debug dot1x error
Function:
Enable the debug information of dot1x about errors; the no operation of this command will disable that debug
information.
Parameters:
None.
Command Mode:
Admin Mode.
Usage Guide:
By enabling the debug information of dot1x about errors, users can check the information of errors that occur in the
processes of the Radius protocol operation, which might help diagnose the cause of faults if there is any.
Example:
Enable the debug information of dot1x about errors.
Switch#debug dot1x error
41.3 debug dot1x fsm
Command:
debug dot1x fsm {all | aksm | asm | basm | ratsm} interface <interface-name>
no debug dot1x fsm {all | aksm | asm | basm | ratsm} interface <interface-name>
Function:
Enable the debug information of dot1x state machine; the no operation of this command will disable that debug
information.
Command Mode:
Admin Mode.
41-169