Planet Networking & Communication SGS-6340-24T4S Command Manual page 695

40.4 access-list (ip standard)
Command:
access-list <num> {deny | permit} {{<sIpAddr> <sMask >} | any-source| {host-source <sIpAddr>}}
no access-list <num>
Functions:
Create a numeric standard IP access-list. If this access-list exists, then add a rule list; the "no access-list
<num>" operation of this command is to delete a numeric standard IP access-list.
Parameters:
<num> is the No. of access-list, 100-199; <sIpAddr> is the source IP address, the format is dotted decimal notation;
<sMask > is the reverse mask of source IP, the format is dotted decimal notation.
Command Mode:
Global mode
Default:
No access-lists configured.
Usage Guide:
When the user assign specific <num> for the first time, ACL of the serial number is created, then the lists are added
into this ACL.
Examples:
Create a numeric standard IP access-list whose serial No. is 20, and permit date packets with source address of
10.1.1.0/24 to pass, and deny other packets with source address of 10.1.1.0/16.
Switch(config)#access-list 20 permit 10.1.1.0 0.0.0.255
Switch(config)#access-list 20 deny 10.1.1.0 0.0.255.255
40.5 access-list(mac extended)
Command:
access-list <num> {deny | permit} {any-source-mac | {host-source-mac <host_smac>} | {<smac>
<smac-mask>}} {any-destination-mac | {host-destination-mac <host_dmac>} | {<dmac> <dmac-mask>}}
[untagged-eth2 | tagged-eth2 | untagged-802-3 | tagged-802-3]
no access-list <num>
40-143