Debug Arp; Show Arp - Planet Networking & Communication SGS-6340-24T4S Command Manual

23.3.4 debug arp

Command: debug arp {receive|send|state}
no debug arp {receive|send|state}
Function:
Enables the ARP debugging function; the "no debug arp {receive|send|state}" command disables this debugging
function.
Parameter:
receive the debugging-switch of receiving ARP packets of the switch; send the debugging-switch of sending ARP
packets of the switch; state the debugging-switch of APR state changing of the switch.
Default:
ARP debug is disabled by default.
Command mode:
Admin Mode.
Usage Guide:
Display contents for ARP packets received/sent, including type, source and destination address, etc.
Example:
Enable ARP debugging.
Switch#debug arp receive
%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251, 00-e0-4c-88-ad-bc, dst 172.16.1.110,
00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251, 00-e0-4c-88-ad-bc, dst 172.16.1.110,
00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
e%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251, 00-e0-4c-88-ad-bc, dst 172.16.1.110,
00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251, 00-e0-4c-88-ad-bc, dst172.16.1.110,
00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.

23.3.5 show arp

Command:
show arp [<ipaddress>] [<vlan-id>] [<hw-addr>] [type {static | dynamic}] [count] [vrf word]
23-25