Planet Networking & Communication SGS-6340-24T4S Command Manual page 650

Command Mode:
Global Mode
Usage Guide:
The source control access-list applies to interface with only enabling global multicast source control, and configure to
disabled global multicast source control without configuring source control access-list on every interface. After
configuring the command, multicast data received from every interface does not have matching multicast source
control list item, and then they will be thrown away by switches, namely only multicast data matching to PERMIT can
be received and forwarded.
Example:
Switch(config)#ip multicast source-control
37.1.8 ip multicast source-control access-group
Command:
ip multicast source-control access-group <5000-5099>
no ip multicast source-control access-group <5000-5099>
Function:
Configure multicast source control access-list used on interface, the "no ip multicast source-control access-group
<5000-5099>" command deletes the configuration.
Parameter:
<5000-5099>: Source control access-list number.
Default:
None
Command Mode:
Interface Configuration Mode
Usage Guide:
The command configures with only enabling global multicast source control. After that, it will match multicast data
message imported from the interface according to configured access-list, such as matching: permit, the message will
be received and forwarded; otherwise the message will be thrown away.
37-98