Planet Networking & Communication SGS-6340-24T4S Command Manual page 469

Command Mode:
Admin Mode.
Example:
To enable debugging of sending command from OSPF process redistributed to other OSPF process routing.
Switch#debug ospf redistribute message send
25.19 debug ospf redistribute route receive
Command:
debug ospf redistribute route receive
no debug ospf redistribute route receive
Function:
To enable/disable debugging switch of received routing message from NSM for OSPF process.
Parameter:
None.
Default:
Disabled.
Command Mode:
Admin Mode.
Usage Guide:
None.
Example:
To enable debugging switch of received routing message from NSM for OSPF process.
Switch# debug ospf redistribute route receive
25-74