Planet Networking & Communication SGS-6340-24T4S Command Manual page 781

Command mode:
Global Mode
Default:
The default value is 5 minutes.
Usage Guide:
This command specifies the time to wait for the RADIUS server to recover from inaccessible to accessible. When the
switch acknowledges a server to be inaccessible, it marks that server as having invalid status, after the interval
specified by this command; the system resets the status for that server to valid.
Example:
Setting the down-restore time for RADIUS server to 3 minutes.
Switch(config)#radius-server dead-time 3
46.14 radius-server key
Command:
radius-server key {0 | 7} <string>
no radius-server key
Function:
Specifies the key for the RADIUS server (authentication and accounting); the "no radius-server key"
deletes the key for RADIUS server.
Parameters:
<string> is a key string for RADIUS server, If key option is set as 0, the key is not encrypted and its range should not
exceed 64 characters, if key option is set as 7, the key is encrypted and its range should not exceed 64 characters.
Command mode:
Global Mode
Usage Guide:
The key is used in the encrypted communication between the switch and the specified RADIUS server. The key set
must be the same as the RADIUS server set, otherwise, proper RADIUS authentication and accounting will not
perform properly.
46-229
command