Planet Networking & Communication SGS-6340-24T4S Command Manual page 502

detail: Display detailed messages of all neighbors
<ifaddress> Interface IP address
Default:
Not displayed
Command Mode:
Admin and configuration mode
Usage Guide:
OSPF neighbor state can be checked by viewing the output of this command.
Example:
Switch#show ip ospf neighbor
OSPF process 0:
Neighbor ID
192.168.1.1
192.168.1.3
192.168.1.3
Displayed information
Neighbor ID
Priority
State
Dead time
Address
Interface
25.59 show ip ospf redistribute
Command:
show ip ospf [<process-id>] redistribute
Function:
To display the routing message redistributed from external process of OSPF.
Pri State Dead Time
1 Full/Backup
1 Full/DR
1 Full/ -
Address
00:00:32 6.1.1.1
00:00:36 20.1.1.3
00:00:30 20.1.1.3
Explanation
ID Neighbor ID
Priority
Neighbor relation state
Neighbor dead time
Interface Address
Interface name
25-107
Interface
Vlan1
Vlan2
VLINK2