Lldp Enable - Planet Networking & Communication SGS-6340-24T4S Command Manual

Usage Guide:
When the debug switch is enabled, users can check the receiving and sending of packets and other information on
the port.
Example:
Enable the debug switch of LLDP function on the switch.
Switch#debug lldp packets interface ethernet 1/1
%Jan 01 00:02:40 2006 LLDP-PDU-TX

8.4 lldp enable

Command:
lldp enable
lldp disable
Function:
Globally enable LLDP function; disable command globally disables LLDP function.
Parameters:
None.
Default:
Disable LLDP function.
Command Mode:
Global Mode.
Usage Guide:
If LLDP function is globally enabled, it will be enabled on every port.
Example:
Enable LLDP function on the switch.
Switch(config)#lldp enable
PORT= ethernet 1/1
8-185