Planet Networking & Communication SGS-6340-24T4S Command Manual page 760

Usage Guide:
None.
Example:
Configure that interface 1/3 of the switch will forward data packets from an IP address which is one of 10 consecutive
IP addresses starting from 10.10.10.1.
Switch(Config-If-Ethernet 1/3)#am ip-pool 10.10.10.1 10
43.4 am mac-ip-pool
Command:
am mac-ip-pool <mac-address> <ip-address>
no am mac-ip-pool <mac-address> <ip-address>
Function:
Set the AM MAC-IP address of the interface, allow/deny the IP messages or APR messages from a source IP within
that segment to be forwarded via the interface.
Parameter:
<mac-address> is the source MAC address; <ip-address> is the source IP address of the packets, which is a 32 bit
binary number represented in four decimal numbers.
Default:
MAC-IP address pool is empty.
Command Mode:
Port Mode.
Usage Guide:
None.
Example:
Configure that the interface 1/3 of the switch will allow data packets with a source MAC address of 11-22-22-11-11-11
and a source IP address of 10.10.10.1 to be forwarded.
Switch(Config-If-Ethernet1/3)#am mac-ip-pool 11-22-22-11-11-11 10.10.10.1
43-208