Planet Networking & Communication SGS-6340-24T4S Command Manual page 934

Default:
Disabled.
Usage Guide:
This command is used to look up correspond address based on entered client name, it can look up both IPv4 and
IPv6 address. This command only used for domain name mapping, it have no other application function. When
command is running, interrupt is forbidding. If configured many servers and domain name suffix, longer time will be
required for domain name mapping.
Example:
To look up the IPv4 address of www.sina.com.
Switch(config)# dns lookup ipv4 www.sina.com
64.5 show dns name-server
Command:
show dns name-server
Function:
To display the information of configured DNS server.
Parameter:
None.
Command Mode:
Admin and Configuration Mode.
Example:
Switch# show dns name-server
DNS NAME SERVER:
Address
10.1.120.231
10.1.180.85
2001::1
Priority
100
80
20
64-382