Planet Networking & Communication SGS-6340-24T4S Command Manual page 834

Usage Guide:
Use ";" or "-" to input the VLAN or multi-VLANs, but do not exceed 128, and CLI length can not exceed 80 characters.
Egress direction filtering is not supported by switch.
Example:
Configure the numeric IP ACL and enable the statistic function for Vlan 1-5, 6, 7-9.
Switch(config)#vacl ip access-group 1 in traffic-statistic vlan 1-5; 6; 7-9
52.4 vacl ipv6 access-group
Command:
vacl ipv6 access-group (<500-699> | WORD) {in } (traffic-statistic|) vlan WORD
no ipv6 access-group {<500-699> | WORD} {in } vlan WORD
Function:
This command configure VACL of IPv6 on the specific VLAN.
Parameter:
<500-599> | WORD: Configure the IPv6 digital standard access table rule or IPv6 command standard access table
rule.
in : Filter the ingress traffic.
traffic-statistic: Enable the statistic of matched packets number.
vlan WORD: The VLAN will be bound to VACL.
Command mode:
Global Mode.
Default:
None.
Usage Guide:
Use ";" or "-" to input the VLAN or multi-VLANs, but do not exceed 128, and CLI length cannot exceed
characters. Egress direction filtering and extended IPv6 is not supported by switch.
Example:
Configure the numeric IPv6 ACL for Vlan 5.
Switch(config)#vacl ipv6 access-group 600 in traffic-statistic vlan 5
52-282
80