Planet Networking & Communication SGS-6340-24T4S Command Manual page 455

2 is version 2 rip.
Default:
Sent and received data packet is version 2 by default.
Command Mode:
Router mode and address-family mode
Usage Guide:
1. refers to that each interface of the layer 3 switch only sends/receives the RIP-I data packets.
2. refers to that each interface of the layer 3 switch only sends/receives the RIP-II data packets. The RIP-II data
packet is the default version.
Example:
Configure the version of all RIP data packets sent/received by router interfaces to version 2.
Switch(config-router)#version 2
Related Command:
ip rip receive version
ip rip send version
24-60