Planet Networking & Communication SGS-6340-24T4S Command Manual page 427

Example:
Switch#debug rip redistribute route receive
Switch#no debug rip redistribute route receive
24.6 default-information originate
Command:
default-information originate
no default-information originate
Function:
Allow the network 0.0.0.0 to be redistributed into the RIP. The "no default-information originate" disable this
function.
Default:
Disabled
Command Mode:
Router mode
Example:
Switch# config terminal
Switch(config)# router rip
Switch(config-router)# default-information originate
24.7 default-metric
Command:
default-metric <value>
no default-metric
Function:
Set the default metric value of the introduced route. The "no default-metric" command restores the default value to
1.
24-32