Planet Networking & Communication SGS-6340-24T4S Command Manual page 833

Usage Guide:
Egress direction filtering is not supported by switch.
Example:
Switch (config)#show vacl vlan 2
Vlan 2:
IP Ingress access-list used is 100, traffic-statistics Disable.
Switch (config)# show vacl vlan 3
Vlan 3:
IP Ingress access-list used is myacl, packet(s) number is 5.
Displayed Information
Vlan 2
100, myacl
traffic-statistics Disable
packet(s) number is 5
52.3 vacl ip access-group
Command:
vacl ip access-group {<1-299> | WORD} {in | out} [traffic-statistic] vlan WORD
no vacl ip access-group {<1-299> | WORD} {in | out} vlan WORD
Function:
This command configure VACL of IP type on the specific VLAN.
Parameter:
<1-299> | WORD: Configure the numeric IP ACL (include: standard ACL rule <1-99>, extended ACL rule <100-299>)
or the named ACL.
in | out: Filter the ingress/egress traffic.
traffic-statistic: Enable the statistic of matched packets number.
vlan WORD: The VLAN will be bound to VACL.
Command mode:
Global Mode.
Default:
None.
Explanation
The name of VLAN
The name of VACL
Disable VACL statistic function
The sum of out-profile data packets matching this VACL
52-281