Planet Networking & Communication SGS-6340-24T4S Command Manual page 582

Example:
Set remote-id of Relay Agent option82 as the compatible format with HP manufacturer.
Switch(config)#ip dhcp relay information option remote-id format vs-hp
32.6 ip dhcp relay information option self-defined remote-id
Command:
ip dhcp relay information option self-defined remote-id {hostname | mac | string WORD}
no ip dhcp relay information option self-defined remote-id
Function:
Set creation method for option82, users can define the parameters of remote-id suboption by themselves.
Parameters:
WORD the defined character string of remote-id by themselves, the maximum length is 64.
Command Mode:
Global Mode
Default:
Using standard method.
Usage Guide:
After configure this command, if users do not configure remote-id on interface, it will create remote-id suboption for
option82 according to self-defined method. For mac, use the format such as 00-02-d1-2e-3a-0d if it is filled to
packets with ascii format, but hex format occupies 6 bytes. Each option will be filled to packets according to the
configured order of the commands and divide them with delimiter (delimiter is ip dhcp relay information option
delimiter configuration).
Example:
Set self-defined method and character string of remote-id suboption are hostname and abc respectively for option82.
Switch(config)#ip dhcp relay information option self-defined remote-id hostname string abc
32-30