Planet Networking & Communication SGS-6340-24T4S Command Manual page 841

Example:
Configure the conflict binding check mode to probe mode.
Switch(config)#savi check binding probe mode
53.1.6 savi enable
Command:
savi enable
no savi enable
Function:
Enable the global SAVI function, the no command disables this global function.
Parameter:
None.
Command Mode:
Global Mode.
Default:
Disable the global SAVI function.
Usage Guide:
Command configuration can be processed for SAVI function after enabling the global SAVI function. Because SAVI
function has already contained security RA function, global SAVI function and security RA function are mutually
exclusive in the global mode.
Example:
Enable SAVI function.
Switch(config)#savi enable
53-289