Planet Networking & Communication SGS-6340-24T4S Command Manual page 975

Command Mode:
Global Mode.
Default:
Disable.
Usage Guide:
With PoE globally disabled, there would be no power output no matter what the power state of a specified port is.
Example:
Globally disable PoE.
Switch(Config)#no power inline enable
68.1.4 power inline enable (Port)
Command:
power inline enable
no power inline enable
Function:
Enable/disable PoE power supply.
Parameters:
None.
Command Mode:
Port Mode.
Default:
Enable.
Usage Guide:
Enabled: Automatically detect PD. In such a state, PSE will automatically detect and classify a PD, and provide
power supply for it according to the classification. If a PD connection is detected, its specified output power will be
satisfied as long as there is enough available power, after which the corresponding LED indicator will be updated.
Otherwise, the power distribution rules will decide whether or not to implement this power supply. During a normal
power supply process, if PD requires for an extra power which exceeds the max threshold value, the supply will be
68-423