Planet Networking & Communication SGS-6340-24T4S Command Manual page 629

Default:
Use standard format to set remote-id.
Usage Guide:
The additive option 82 needs to associate with third-party DHCP server, it is used to specify the remote-id content by
users when the standard remote-id format can not satisfy server's request.
Example:
Set the suboption remote-id of DHCP option82 as street-1-1.
Switch(config)#ip dhcp snooping information option remote-id street-1-1
35.19 ip dhcp snooping information option self-defined
remote-id
Command:
ip dhcp snooping information option self-defined remote-id {hostname | mac | string WORD}
no ip dhcp snooping information option self-defined remote-id
Function:
Set creation method for option82, users can define the parameters of remote-id suboption by themselves.
Parameters:
WORD the defined character string of remote-id by themselves, the maximum length is 64.
Command Mode:
Global Mode
Default:
Using standard method.
Usage Guide:
After configure this command, if users do not configure ip dhcp snooping information option remote-id globally, it will
create remote-id suboption for option82 according to self-defined method. For mac, use the format such as
00-02-d1-2e-3a-0d if it is filled to packets with ascii format, but hex format occupies 6 bytes. Each option will be filled
to packets according to the configured order of the commands and divide them with delimiter (delimiter is ip dhcp
snooping information option delimiter configuration).
35-77