Planet Networking & Communication SGS-6340-24T4S Command Manual page 871

55.5 debug ulpp flush content interface
Command:
debug ulpp flush content interface <name>
no debug ulpp flush content interface <name>
Function:
Show the contents of the receiving flush packets. The no operation disables the shown contents.
Parameter:
<name> is the name of the port.
Default:
Do not display.
Command mode:
Admin mode.
Usage Guide:
None.
Example:
Show the contents of the receiving flush packets for the port1/1.
Switch# debug ulpp flush content interface e1/1
Flush packet content:
Destination MAC: 01-03-0f-cc-cc-cc
Source MAC: 00-a0-cc-d7-5c-ea
Type: 8100
Vlan ID: 1
Length: 518
Control Type: 2
Control Vlan: 10
MAC number:0
Vlan Bitmap:
55-319