Planet Networking & Communication SGS-6340-24T4S Command Manual page 604

Parameters:
remote-id, user-defined content of option 37.
Default:
Using vlan MAC address as remote-id content by default such as "00-01-ac-12-23" with '-' hyphen.
Command Mode:
Port mode
Usage Guide:
Because option 37 information added by switch may associate with third-party DHCPv6 servers, users can specify
remote-id content based on server condition when standard remote-id of the switch cannot satisfy the demand of
server. The enterprise-number together with vlan MAC address is used as the remote-id by default.
Example:
Enable abc as remote-id of DHCPv6 option 37.
Switch(Config-if-Ethernet1/1)# ipv6 dhcp snooping remote-id abc
34.1.13 ipv6 dhcp snooping remote-id option
Command:
ipv6 dhcp snooping remote-id option
no ipv6 dhcp snooping remote-id option
Function:
This command enables DHCPv6 SNOOPING to support option 37, the no form of this command disables it.
Parameters:
None.
Default:
Disable.
Command Mode:
Global configuration mode
34-52