Planet Networking & Communication SGS-6340-24T4S Command Manual page 916

Usage Guide:
To display NTP authentication information, if the switch is enabled, and if the packets schlepped authentication
information when the packet in sending or receiving process, then the key identifier will be printed out.
Example:
To enable the switch of displaying NTP authentication information.
Switch# debug ntp authentication
62.4 debug ntp events
Command:
debug ntp events
no debug ntp events
Function:
To enable/disable debug switch of displaying NTP event.
Parameter:
None.
Default:
Disable the debug switch of displaying NTP event.
Command Mode:
Admin Mode.
Usage Guide:
To enable debug switch of displaying NTP event, after that, if some server changed from available to unavailable or
from unavailable to available, the received illegal packet events will be printed.
Example:
To enable debug switch of displaying NTP event information.
Switch# debug ntp events
62-364