Planet Networking & Communication SGS-6340-24T4S Command Manual page 881

55.18 show ulpp flush-receive-port
Command:
show ulpp flush-receive-port
Function:
Show the port which receive flush packet, flush type and control VLAN.
Parameter:
None.
Default:
None.
Command mode:
Admin mode.
Usage Guide:
None.
Example:
Show the information that the port receives flush packets.
Switch# show ulpp flush-receive-port
ULPP flush-receive portlist:
Portname
------------------------------------------------
Ethernet1/1
Ethernet1/3
55.19 show ulpp group
Command:
show ulpp group [group-id]
Function:
Show the configuration information of the ULPP groups which have been configured.
Type Control Vlan
ARP 1
MAC 1;3;5-10
55-329