Planet Networking & Communication SGS-6340-24T4S Command Manual page 421

Function:
Displays the ARP table.
Parameters:
<ipaddress> is a specified IP address; <vlan-id> stands for the entry for the identifier of specified VLAN;
<hw-addr> for entry of specified MAC address; static for static ARP entry; dynamic for dynamic ARP entry; count
displays number of ARP entries; word is the specified vrf name.
Command mode:
Admin Mode
Usage Guide:
Displays the content of current ARP table such as IP address, MAC address, hardware type, interface name, etc.
Example:
Switch#show arp
ARP Unicast Items: 7, Valid: 7, Matched: 7, Verifying: 0, Incomplete: 0, Failed: 0, None: 0
Address
50.1.1.6
50.1.1.9
150.1.1.2
Displayed information
Total arp items
Valid
Matched
Verifying
Incomplete
Failed
None
Address
Hardware Address
Interface
Port
Flag
Hardware Addr Interface
00-0a-eb-51-51-38 Vlan50
00-00-00-00-00-09
00-00-58-fc-48-9f
Explanation
Total number of ARP entries.
ARP entry number matching the filter conditions and
attributing the legality states.
ARP entry number matching the filter conditions.
ARP entry number at verifying again validity for ARP.
ARP entry number have ARP request sent without ARP
reply.
ARP entry number at failed state.
ARP entry number at begin-found state.
IP address of ARP entries.
MAC address of ARP entries.
Layer 3 interface corresponding to the ARP entry.
Physical (Layer2) port corresponding to the ARP entry.
Describes whether ARP entry is dynamic or static.
Port
Ethernet1/11
Vlan50 Ethernet1/1
Vlan150 Ethernet1/4
23-26
Flag
Dynamic
Static
Dynamic