Planet Networking & Communication SGS-6340-24T4S Command Manual page 747

42.6 debug vlan mac count
Command:
debug vlan mac count
no debug vlan mac count
Function:
When the number limitation function debug of MAC in the VLAN, if the number of dynamic MAC and the number of
MAC in the VLAN is larger than the max number allowed, users will see debug information. "no debug vlan mac
count" command is used to disable the number limitation function debug of MAC in the VLAN.
Parameters:
None.
Command Mode:
Admin Mode.
Default Settings:
None.
Usage Guide:
Display the debug information of the number of dynamic MAC in the VLAN.
Examples:
Switch#debug vlan mac count
%Jun 14 16:04:40 2007 Current mac count 21 is more than or equal to the maximum limit in vlan 1!!
%Jun 14 16:04:40 2007 Mac learning will be stopped and some mac will be delete !!
42.7 ip arp dynamic maximum
Command:
ip arp dynamic maximum <value>
no ip arp dynamic maximum
Function:
Set the max number of dynamic ARP allowed in the VLAN, and, at the same time, enable the number limitation
function of dynamic ARP in the VLAN; "no ip arp dynamic maximum" command is used to disable the number
limitation function of dynamic ARP in the VLAN.
42-195