Example:
Configuring static ARP for interface VLAN1.
Switch(Config-if-Vlan1)#arp 1.1.1.1 00-30-4f-f0-12-34 interface eth 1/2
23.3.2 clear arp-cache
Command:
clear arp-cache
Function:
Clears ARP table.
Command mode:
Admin Mode
Example:
Switch#clear arp-cache
23.3.3 clear arp traffic
Command:
clear arp traffic
Function:
Clear the statistic information of ARP messages of the switch. For box switches, this command will only clear
statistics of APP messages received and sent from the current boardcard.
Command mode:
Admin Mode
Example:
Switch#clear arp traffic
23-24