Planet Networking & Communication SGS-6340-24T4S Command Manual page 816

Parameter:
<string>: identifier-string, the max character number is 47 bytes.
{sp | sv | pv | spv}: This option can select the combination format for slot, port, vlan, sp means slot and port, sv
means slot and vlan, pv means port and vlan, spv means slot, port and vlan.
<WORD>: The delimiter between slot, port and vlan, the range is (# | . | , | ; | : | / | space). Note: There are two
delimiter WORDs in spv combo mode, the first between slot and port, the second between port and vlan.
Command Mode:
Global mode
Default:
This configuration is null.
Usage Guide:
This command is used to configure global circuit id, the priority is higher than pppoe intermediate-agent
access-node-id command. circuit-id value is access-node-id +" eth "+ Slot ID + delimiter + Port Index + delimiter +
Vlan ID, access-node-id occupies n bytes (n<48), " eth " is space + e + t + h + space, it occupies 5 bytes, Slot ID
occupies 2 bytes, Port Index occupies 3 bytes, Vlan ID occupies 4 bytes, delimiter occupies 1 byte.
Example:
Configure access-node-id as xyz, use spv combination mode, delimiter with "#"between Slot ID and Port ID, delimiter
with "/"between Port ID and Vlan ID.
Switch(config)#pppoe intermediate-agent identifier-string xyz option spv delimiter # delimiter /
Switch# show pppoe intermediate-agent identifier-string option delimiter
config identifier string is : xyz
config option is : slot , port and vlan
the first delimiter is : "# "
the second delimiter is : "/ "
After port ethernet1/3 of vlan3 receives PPPoE packets, circuit-id value of the added vendor tag is "xyz eth
01#003/0003".
50.13 pppoe intermediate-agent vendor-tag strip
Command:
pppoe intermediate-agent vendor-tag strip
no pppoe intermediate-agent vendor-tag strip
50-264