Planet Networking & Communication SGS-6340-24T4S Command Manual page 589

Parameters:
None.
Command Mode:
Admin and Global Configuration Mode.
User Guide:
Use this command to check the state information of Relay Agent option82 during operation.
Example:
Switch#show ip dhcp relay information option
ip dhcp server relay information option(i.e. option 82) is disabled
ip dhcp relay information option(i.e. option 82) is enabled
Vlan2:
ip dhcp relay information policy keep
ip dhcp relay information option subscriber-id standard
Vlan3:
ip dhcp relay information policy replace
ip dhcp relay information option subscriber-id foobar
32-37