Planet Networking & Communication SGS-6340-24T4S Command Manual page 487

25.41 key chain
Command:
key chain <name-of-chain>
no key chain < name-of-chain >
Function:
This command is for entering a keychain manage mode and configure a keychain. The "no key chain <
name-of-chain >" command deletes one keychain.
Parameter:
<name-of-chain> is the name string of the keychain the length of which is not specifically limited.
Command Mode:
Global Mode and Keychain Mode.
Example:
Switch#config terminal
Switch(config)#key chain mychain
Switch(config-keychain)#
25.42 log-adjacency-changes detail
Command:
log-adjacency-changes detail
no log-adjacency-changes detail
Function:
Configure to keep a log for OSPF adjacency changes or not.
Default:
Don't l keep a log for OSPF adjacency changes by default.
Command Mode:
OSPF Protocol Configuration Mode
Usage Guide:
When this command is configured, the OSPF adjacency changes information will be recorded into a log.
25-92