Planet Networking & Communication SGS-6340-24T4S Command Manual page 852

Example:
Enable binding debug of slaac type.
Switch#debug ipv6 nd snooping binding
53.2.5 debug ipv6 nd snooping event
Command:
debug ipv6 nd snooping event
no debug ipv6 nd snooping event
Function:
Enable the event debug of slaac type for SAVI, no command disables the event debug.
Parameter:
None.
Command Mode:
Admin Mode.
Default:
None.
Usage Guide:
After enable event debug, the relative event information of slaac type will be print for misarranging. The no command
disables this function.
Example:
Enable the event debug of slaac type.
Switch#debug ipv6 nd snooping event
53.2.6 debug ipv6 nd snooping packet
Command:
debug ipv6 nd snooping packet
no debug ipv6 nd snooping packet
53-300