Planet Networking & Communication SGS-6340-24T4S Command Manual page 746

Usage Guide:
Display the debug information of the number of dynamic MAC on the port.
Examples:
Switch#debug switchport mac count
%Jun 14 16:04:40 2007 Current mac count 21 is more than or equal to the maximum limit in port Ethernet3/1
!!%Jun 14 16:04:40 2007 Mac learning will be stopped and some mac will be delete !!
42.5 debug switchport nd count
Command:
debug switchport nd count
no debug switchport nd count
Function:
When the number limitation function debug of ND on the port, if the number of dynamic ND and the number of ND on
the port is larger than the max number allowed, users will see debug information. "no debug switchport nd count"
command is used to disable the number limitation function debug of ND on the port.
Parameters:
None
Command Mode:
Admin Mode
Default Settings:
None
Usage Guide:
Display the debug information of the number of dynamic ND on the port
Examples:
Switch#debug switchport arp count
%Jun 14 16:04:40 2007 Current neighbor count 21 is more than or equal to the maximum limit in port Ethernet3/1
!!%Jun 14 16:04:40 2007 Neighbor learning will be stopped and some mac will be delete !!
42-194