Ip Rip Receive Version - Planet Networking & Communication SGS-6340-24T4S Command Manual

Switch(Config-if-Vlan1)# ip rip receive-packet
Related Command:
ip rip send-packet

24.16 ip rip receive version

Command:
ip rip receive version { 1 | 2|1 2 }
no ip rip receive version
Function:
Set the version information of the RIP packets the interface receives. The default version is 2; the "no ip rip receive
version" command restores the value set by using the version command.
Parameter:
1 and 2 respectively stands for RIP version 1 and RIP version 2, 1 2 stands for the RIP versions 1, 2.
Default:
Version 2
Command Mode:
Interface Configuration Mode.
Example:
Switch# config terminal
Switch(config)# interface vlan 1
Switch(Config-if-Vlan1)# ip rip receive version 1 2
Related Command:
Version
24-40